Router1(config-dhcp)#prefix-delegation pool VLAN10-pool
Router1(config-dhcp)#dns-server AAAA:1::19
Router1(config-dhcp)#domain-name oreilly.com
Router1(config-dhcp)#exit
Router1(config)#interface FastEthernet0/0
Router1(config-if)#ipv6 address AAAA:1::1/64
Router1(config-if)#ipv6 address FE80::1 link-local
Router1(config-if)#ipv6 nd managed-config-flag
Router1(config-if)#ipv6 nd other-config-flag
Router1(config-if)#ipv6 dhcp server DHCPv6POOL rapid-commit preference 1 allow-hint
Router1(config-if)#exit
Router1(config)#end
Router1#
注释 此特性仅限于高端路由器
Router1#show ipv6 dhcp pool DHCPv6POOL
DHCPv6 pool: DHCPv6POOL
Static bindings:
Binding for client 00030001000E84244E70
IA PD: IA ID not specified
Prefix: AAAA:1::23F6:33BA/64
preferred lifetime 604800, valid lifetime 2592000
Prefix pool: VLAN10-pool
preferred lifetime 604800, valid lifetime 2592000
DNS server: AAAA:1::19
Domain name: oreilly.com
Active clients: 0
Router1#
25.4. 配置RIP的IPv6版本
提问 配置支持IPv6路由的RIP
回答
Router1#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router1(config)#ipv6 unicast-routing
Router1(config)#ipv6 router rip RIP_PROC
Router1(config-rtr)#exit
Router1(config)#interface FastEthernet0/0
Router1(config-if)#ipv6 address AAAA:5:1/64
Router1(config-if)#ipv6 rip RIP_PROC enable
Router1(config-if)#exit
Router1(config)#interface Serial0/0
Router1(config-if)#ipv6 address AAAA:1:2/64
Router1(config-if)#ipv6 rip RIP_PROC enable
Router1(config-if)#frame-relay map ipv6 AAAA:1:3 206 broadcast
Router1(config-if)#exit
Router1(config)#end
Router1#
注释 ipv6版本的RIP区别在于不需要配置network命令，在路由表中看到的下一跳地址都是
文章整理：西部数码--专业提供域名注册、虚拟主机服务
http://www.west263.com
以上信息与文章正文是不可分割的一部分,如果您要转载本文章,请保留以上信息，谢谢!
