RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
usbcore: registered new interface driver ub
dm9000 Ethernet Driver
eth0: dm9000 at f6100300,f6100304 IRQ 51 MAC: 08:08:08:08:12:27
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
s3c2440-nand s3c2440-nand: Tacls=1, 9ns Twrph0=4 39ns, Twrph1=1 9ns
NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 3579 at 0x037ec000
Creating 7 MTD partitions on "NAND 64MiB 3,3V 8-bit":
0x00000000-0x00030000 : "U-Boot-1.3.1"
0x00030000-0x00040000 : "U-Boot-1.3.1 Parameter"
0x00040000-0x00500000 : "Linux2.6.24 Kernel(JFFS2)"
0x00500000-0x00a00000 : "Root(cramfs)"
0x00a00000-0x00f00000 : "Root(JFFS2)"
0x00f00000-0x01400000 : "Root(YAFFS)"
0x01400000-0x04000000 : "DATA"
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: Product: S3C24XX OHCI
usb usb1: Manufacturer: Linux 2.6.24 ohci_hcd
usb usb1: SerialNumber: s3c24xx
usbcore: registered new interface driver libusual
mice: PS/2 mouse device common for all mice
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
s3c2440-i2c s3c2440-i2c: slave address 0x10
s3c2440-i2c s3c2440-i2c: bus frequency set to 98 KHz
s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
TCP cubic registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
s3c2410-rtc s3c2410-rtc: setting system clock to 2008-02-20 16:01:20 UTC (1203523280)
eth0: link down
IP-Config: Complete:
device=eth0, addr=192.168.1.2, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.1.2, domain=, nis-domain=(none),
bootserver=192.168.1.22, rootserver=192.168.1.22, rootpath=
Looking up port of RPC 100003/2 on 192.168.1.22
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Looking up port of RPC 100005/1 on 192.168.1.22
VFS: Mounted root (nfs filesystem).
Freeing init memory: 120K
init started: BusyBox v1.9.1 (2008-02-20 14:54:41 CST)
starting pid 781, tty '': '/etc/init.d/rcS'
----------mount all
----------Starting mdev......
*********************************************************
Tekkaman Ninja 2440 Rootfs(nfs) 2008.2
Love Linux ! ! @@ Love Ke Ke ! !
********************************************************
starting pid 785, tty '': '/bin/login'
192.168.1.2 login: root
Password:
login[785]: root login on `console
Processing /etc/profile...
Set search library path in /etc/profile
Set user path in /etc/profile
Set PS1 in /etc/profile
Done
[root@/root]#
以上我使用nfs挂载的，后面我会介绍如何挂载jffs2、cramfs连同yaffs文档系统，有了这个基本的文档系统以后，其他就好办了！以下是这个文档系统，编译器是gcc4.1.2（制作编译器所用内核为2.6.24）。
文档:
rootfs.tar.bz2
大小:
1218KB
下载:
下载
本文来自ChinaUnix博客，假如查看原文请点：http://blog.chinaunix.net/u2/63379/showart_513198.html
文章整理：西部数码--专业提供域名注册、虚拟主机服务
http://www.west263.com
以上信息与文章正文是不可分割的一部分,如果您要转载本文章,请保留以上信息，谢谢!
