Snoop 的使用

Snoop 是Solaris 系统中自带的工具， 是个用于显示网络通讯的程式， 他
可捕获IP 包并将其显示或保存到指定文档. (限终极用户使用snoop)
Snoop 可将捕获的包以一行的形式加以总结或用多行加以周详的描述(有
调用不同的参数–v -V来实现). 在总结方式下(-V  , 将仅显示最高层的相关协
议, 例如一个NFS 包将仅显示NFS 信息, 其低层的RPC, UDP, IP, Ethernet 帧信息将不会显示, 但是当加上相应的参数(-v , 这些信息都能被显示出来.
参数简介：
[ -a ] # Listen to packets on audio
[ -d device ] # settable to le?, ie?, bf?, tr?
[ -s snaplen ] # Truncate packets
[ -c count ] # Quit after count packets
[ -P ] # Turn OFF promiscuous mode
[ -D ] # Report dropped packets
[ -S ] # Report packet size
[ -i file ] # Read previously captured packets
[ -o file ] # Capture packets in file
[ -n file ] # Load addr-to-name table from file
[ -N ] # Create addr-to-name table
[ -t r|a|d ] # Time: Relative, Absolute or Delta
[ -v ] # Verbose packet display
[ -V ] # Show all summary lines
[ -p first[,last] ] # Select packet(s) to display
[ -x offset[,length] ] # Hex dump from offset for length
[ -C ] # Print packet filter code
由于snoop 的使用很灵活, 希望能通过下面一些例子的学习来其常见用法.
1. 监听任何以本机为源和目的的包并将其显示出来.
# snoop
2. 监听任何以主机A为源和目的的包并将其显示出来. ( A为主机名, 下同)
- 2 -
# snoop A
3. 监听任何A和B之间的包并将其保存到文档file.
# snoop -o file A B
4. 显示文档file 中指定的包(99-10
# snoop - i file -p 99,108
99 0.0027 boutique -> sunroof NFS C GETATTR FH=8E6C
100 0.0046 sunroof -> boutique NFS R GETATTR OK
101 0.0080 boutique -> sunroof NFS C RENAME FH=8E6C MTra00192
to .nfs08
102 0.0102 marmot -> viper NFS C LOOKUP FH=561E screen.r.13.i386
103 0.0072 viper -> marmot NFS R LOOKUP No such file or directory
104 0.0085 bugbomb -> sunroof RLOGIN C PORT=1023 h
105 0.0005 kandinsky -> sparky RSTAT C Get Statistics
106 0.0004 beeblebrox -> sunroof NFS C GETATTR FH=0307
107 0.0021 sparky -> kandinsky RSTAT R
108 0.0073 office -> jeremiah NFS C READ FH=2584 at 40960 for 8192
5. 周详查看文档file 中第101 个包:
# snoop - i file - v -p101
ETHER: ----- Ether Header -----
ETHER:
ETHER: Packet 101 arrived at 16:09:53.59
ETHER: Packet size = 210 bytes
ETHER: Destination = 8:0:20:1:3d:94, Sun
ETHER: Source = 8:0:69:1:5f:e, Silicon Graphics
ETHER: Ethertype = 0800 (IP)
ETHER:
IP: ----- IP Header -----
IP:
IP: Version = 4, header length = 20 bytes
IP: Type of service = 00
IP: ..0. .... = routine
IP: ...0 .... = normal delay
IP: .... 0... = normal throughput
IP: .... .0.. = normal reliability
IP: Total length = 196 bytes
IP: Identification 19846
IP: Flags = 0X
IP: .0.. .... = may fragment
IP: ..0. .... = more fragments
?
- 3 -
?
6. 查看主机A和主机B之间的NFS 包(命令中的and 和or 为相应的逻辑运
算)
# snoop - i file rpc nfs and A and B
1 0.0000 A -> B NFS C GETATTR FH=8E6C
2 0.0046 B -> A NFS R GETATTR OK
3 0.0080 A -> B NFS C RENAME FH=8E6C MTra00192 to .nfs08
7. 将这些符合条件的包保存到另一文档file2 中:
# snoop - i file -o file2 rpc nfs A B
8. 监听主机A和主机B间任何TCP 80 端口或UDP80端口的包
# snoop A and B and (tcp or udp) and port 80
9. 监听任何的广播包
# snoop broadcast
Using device /dev/hme (promiscuous mode)
10.10.10.50 -> BROADCAST UDP D=177 S=2541 LEN=35
10.10.10.50 -> BROADCAST UDP D=177 S=2541 LEN=35
10.10.10.50 -> BROADCAST UDP D=177 S=2541 LEN=35
10. 监听任何的多播包, 并显示周详内容.
#snoop –v multicast
ETHER: ----- Ether Header -----
ETHER:
ETHER: Packet 1 arrived at 12:33:2.16
ETHER: Packet size = 69 bytes
ETHER: Destination = ff:ff:ff:ff:ff:ff, (broadcast)
ETHER: Source = 0:4:76:46:8f:50,
ETHER: Ethertype = 0800 (IP)
ETHER:
IP: ----- IP Header -----
IP:
IP: Version = 4
IP: Header length = 20 bytes
IP: Type of service = 0x00
IP: xxx. .... = 0 (precedence)
IP: ...0 .... = normal delay
- 4 -
IP: .... 0... = normal throughput
IP: .... .0.. = normal reliability
IP: Total length = 55 bytes
IP: Identification = 14658
IP: Flags = 0x0
IP: .0.. .... = may fragment
IP: ..0. .... = last fragment
IP: Fragment offset = 0 bytes
IP: Time to live = 128 seconds/hops
IP: Protocol = 17 (UDP)
IP: Header checksum = ed38
IP: Source address = 10.10.10.50, 10.10.10.50
IP: Destination address = 255.255.255.255, BROADCAST
IP: No options
IP:
UDP: ----- UDP Header -----
UDP:
UDP: Source port = 2541
UDP: Destination port = 177

文章整理：西部数码--专业提供域名注册、虚拟主机服务
http://www.west263.com
以上信息与文章正文是不可分割的一部分,如果您要转载本文章,请保留以上信息，谢谢!